Post by phildyn on Feb 15, 2012 11:28:53 GMT -5
Hi put together a S5 Morini motor, but having trouble getting it to run. it is an iron barrelled motor froma Malaguti Grizzly, but seems to be fitted with an S5T piston (Dykes rings, with the round intake hole in the side). will the engine run with this piston and no reeds? if so should the hole face the inlet or the exhaust?
bore and piston are good and it has new rings, new plug and crankshaft seals. compression feels good and there is a healthy spark. the engine coughs and splutters but wont runs for more than a couple of seconds. I've tried a different carb and fresh fuel, but it is the same. any ideas. Thanks Phil
bore and piston are good and it has new rings, new plug and crankshaft seals. compression feels good and there is a healthy spark. the engine coughs and splutters but wont runs for more than a couple of seconds. I've tried a different carb and fresh fuel, but it is the same. any ideas. Thanks Phil
